Deleting User/Radio Codes - Bosch Solution 2000 User Manual

16 en | Operation with ICON LCD Codepad
2.
3.
4.
5.4.2

Deleting User/Radio Codes

Only the Master Code holder can delete other system user codes.
How to Delete a User Code
1.
2.
3.
To delete other User Codes, repeat this procedure as many times as required.
How to Delete a WE800EV2 Keyfob
1.
2.
3.
How to Delete a RADION Keyfob
1.
2.
3.
5.5 Codepad Alarms
5.5.1 Codepad Duress Alarm
A codepad duress alarm is used as a silent hold-up alarm. This only occurs when the number 9
is added to the end of any valid user code being used to disarm the system (for example,
[25809#]). A duress alarm is only useful if your system is reporting back to a monitoring
station. Domestic reporting (such as a mobile phone) cannot decipher which type of alarm
occurred.
5.5.2 Codepad Panic Alarm
An audible alarm activates when you press the [1] and [3] keys or the [*] and [#] keys
simultaneously.
Contact your installer to disable the codepad panic alarm function or to silence the codepad
panic alarm.
2017.09 | 04 | F.01U.298.028
Enter the RADION keyfob number (301 to 332) you want to add, followed by the [#]
button. Up to 32 RADION keyfobs can be added, but only current keyfob number (1 to 16)
displays through zone indicators on the ICON codepad.
Use manual mode or auto-learn mode to configure RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number, followed by the [#] button.
– Or press [#] button to switch into auto-learn mode. When icon numbers (1 to 16)
flash, press button 1 or 2 of the keyfob. The panel learns the RADION Keyfob ID
number and the last digit of RFID number displays on the codepad. Press [#] button
to confirm.
Enter [#] button to confirm the operation, or press [*] to cancel.
Enter your Master Code, followed by [1] and the [#] button (for example, [25801#]).
Three beeps sound and the STAY and AWAY indicators flash.
Enter the user code number (1 to 32), followed by the [#] button (for example, [2#] =
User 2, [16#] = User 16). Two beeps sound and the selected user number displays on the
codepad indicators.
Press the [*] button to delete the selected User Code. Two beeps are heard and the STAY
and AWAY indicators turn off.
Enter your Master Code, followed by [1] and the [#] button.
Enter the WE800EV2 keyfob number (301 to 332) you want to delete, followed by the [#]
button.
Press the [*] button to delete the WE800EV2 Keyfob.
Enter your Master Code, followed by [1] and the [#] button.
Enter the RADION keyfob number (301 to 332) you want to delete, followed by the [#]
button.
Press the [*] button to delete the RADION Keyfob.
User's Guide
Control Panel
Bosch Security Systems, Inc.