A Feed Deck - Pitney Bowes DA80F Service Manual

5 • Removal and Replacement
DA80F (WF81) Parts Removal
5.17A Feed
Deck
5-30
1. Remove the rear cover (see section 5.2), and front bottom cover (see
section 5.8),
2. Remove wireform feed ramp input guide by unscrewing input guide knob
all the way and lifting up guide from deck. Remove side guide by sliding it
all the away out from the printer.
Wireform Feed
Ramp Input Guide
Knob for
Input Guide
3. Unfasten two thumbscrews for extension bin and remove bin.
4. Unfasten screw on side of deck and on top (see figures below).
Screw on Side of Deck
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
Extension Bin
Side Guide
Thumbscrews
for Extension
Bin (circled)
Screw on Feed Deck