Manual Feed Jobs - Pitney Bowes Relay 3000 User Manual

3 ● Run a Job

Manual Feed Jobs

If you select a manual feed job
where sheet feeder 1 is set for
manual feed of collated sets,
DO NOT load the sheet feeder.
Instead, you will feed collated sets
one at a time, by hand, as required.
Before you run a manual feed job,
pull back the lever (shown here).
This opens the feed mechanism for
manual feed operation.
NOTE: Return this lever to its normal
position when you use the feeder for
automatic operation.
3-6 SV63138 Rev. A