A.2 Lcd Control Panel Menu - Pitney Bowes DA80F Service Manual

Printer Control Panel Menus and Utilities • Appendix A
A.2 LCD
Control Panel
Menu
✍
TIP: LCD printer
control panel menus
can only be accessed
when the printer is in
the "offline" mode.
✍
TIP: Virtually all of
the settings in the
printer LCD Main
Menu and Setup
Menu are overruled
by the Windows ap-
plication sending the
print job to the printer.
DA80F/DA95F AddressRight™ Printers Service Manual (SV61962 Rev. A)
Features of LCD Control Panel Menus on the Printer
From the LCD control panel, you can access three main menus as well as
several other utilities.
Item Function
Configures the appearance of the media
Main Menu
Configures the communication method used
Setup Menu
between the printer and the host computer
Assists in troubleshooting printer problems or
Service Menu
to perform corrective alignment for printing bar-
codes and addresses
Resets all menu settings to factory default val-
Setting Factory
ues
Defaults
Allows you to correct or update the firmware or
Updating
bootloader running the printer
Bootloader/
Firmware
Accessing the LCD Menus
Press On Line. The LCD displays "OFF LINE" and the green light goes out.
• For Main Menu, press Menu.
• For Setup Menu, press and hold Menu for four seconds.
• For Service Menu, press - first, then while holding it down, press Menu
together for two seconds.
Navigating Within the Menus/Changing Settings
• Press - or + to scroll through the menu options.
• Press Enter to select the desired menu option or a submenu option.
• Press - or + to scroll through the submenus within a menu option or the
settings within a menu/submenu option. An asterisk (*) before the setting
indicates that setting is currently selected.
• Press Enter to define a new setting and an asterisk will appear before
the setting indicating you have selected it.
• Press Menu to move up a level (for example, to move from a setting to a
menu option or from a menu option to "OFF LINE").
Exiting the LCD Menus
• Press Menu until the printer LCD displays "OFF LINE".
• Press On Line to enable the printer.
Access Page
User A-4
User A-10
Service A-22
Only
Service A-27
Only
Service A-30
Only
A-3