Single Tone Systems - Motorola MCS 2000 User Manual

Single Tone Systems

DFGB
Function Key Descriptions
F2 - ADD SYS
F3 - PREV SYS
F4 - NEXT SYS
F5 - DELETE SYS
Field Definitions
System
Tone Pretime (ms)
240
From the MAIN MENU, press F4, F6, F7 and then F2 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
...CONV:AUX:SINGLETONE SYSTEM
System............ 1
Tone Pretime (ms)........................250
Tone Duration (ms).......................500
PTT Sidetone.........................Enabled
RAB Sidetone.........................Enabled
F1 F2 F3
HELP ADD PREV NEXT
SYS SYS SYS
This screen allows you to change/view the parameters that pertain to
a Single Tone System. Press Tab to select the desired field, or press the
desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Adds a system.
Accesses the previous system.
Accesses the next system.
Deletes a system. You will be prompted for confirmation before the
system is actually deleted.
Use the UP/DOWN arrow keys to select the desired Single Tone system,
enter the system number directly, or use the F3/F4 function keys to
scroll through the available systems. The radio may have a maximum of
16 systems.
Use the UP/DOWN arrow keys to select or directly enter the desired
value. The Tone Pretime for Tone Signalling specifies the length of
time that "dead" carrier is transmitted between the initiation of the
Tone (RAC) transmission and the actual Tone (RAC) transmission. The
valid range of values is 25 to 6375 ms in 25-ms increments.
The default is 250.
Enter or Scroll to Select System.
SINGLETONE SYSTEM
-----------------
F4 F5 F6 F7
DELETE
SYS
F8 F9 F10
EXIT