Change/View Menu - Motorola MCS 2000 User Manual

Change/View Menu

D
Press F4 at the MAIN MENU to access the CHANGE/VIEW MENU.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW
F1 - HELP
F2 -
F3 - Radio Wide Buttons, Switches, Display, Scan, Phone
F4 - Trunking Systems, Personalities, Call Lists, Options
F5 -
F6 - Conventional Systems, Personalities, MDC, Options
F7 -
F8 - Zone/Channel Assignment
F9 -
F10 - EXIT, Return to Main Menu
F1 F2 F3
HELP RADIO TRUNK
CONFIG DATA
The CHANGE/VIEW MENU is a multi-level menu. Its sub-menus are
used to change or view codeplug features and option configurations.
All codeplug parameters are classified as either Radio Configuration,
Conventional or Trunking. The CHANGE/VIEW MENU functions
permit access to each category.
A codeplug must be loaded into your computer's memory (using GET/SAVE/
PROGRAM MENU functions) before you can access the CHANGE/VIEW
screens. You may change or view an archive file without having a radio
connected.
Note: If your radio model does not contain a specific feature,
you will not be permitted to access the corresponding data field
or screen for that feature. Refer to your Radio Catalog Sheets or
Radio Service Manual for radio model descriptions and features.
The CHANGE/VIEW MENU does NOT actually modify the radio's
codeplug data. Instead, it modifies a copy of the data retrieved from
the codeplug or archive file using GET/SAVE/PROGRAM MENU
functions.
After all change/view modifications are completed, you MUST return
to the GET/SAVE/PROGRAM MENU and program the changes back
into the radio or save them to a new archive file. Otherwise, the
modifications will be lost when you turn off your computer or load another
codeplug into memory.
Select Function F1 - F10.
CHANGE/VIEW MENU
----------------
F4 F5 F6 F7
CONV
DATA
F8 F9 F10
ZONE/CHN EXIT
ASSIGN
87