Motorola MCS 2000 User Manual page 39

Program Zone/Channel
Features
Fill in the Scan List
Now that the personalities are programmed, assign them to switch
positions on the ZONE/TALKGROUP (CHANNEL) ASSIGNMENT
screen.
1. From the CHANGE/VIEW MENU, press F8 to access the ZONE/
TALKGROUP (CHANNEL) ASSIGNMENT screen.
2. Press F6 and then F3 as many times as necessary to add the desired
number of channels.
3. Press the Pg Dn key to return to page 1 if necessary.
4. Press Tab twice to go to the Channel Name field. Enter the desired
name. The name may be up to 11 characters in length but will vary
depending on the radio model.
5. Press Enter or Tab to advance to the Personality field. Use the UP/
DOWN arrow keys to assign the desired Personality Type.
6. Press Tab to go to the Personality Number field. Enter the desired
Personality number directly or use the UP/DOWN arrow keys to
scroll through the available choices.
Repeat steps 5 and 6 for the remaining channels.
Note: A maximum of 48 modes (channels) are allowed for model I MCS
2000 radios and 160 for HHCH models and models II and III.
More may be ordered through an option upgrade.
7. When you are done, press F10 to return to the CHANGE/VIEW
MENU.
Zones can be added on the ZONE/TALKGROUP (CHANNEL)
ASSIGNMENT screen by pressing F2. The channels in a particular zone
should be grouped in some logical way, based for instance on
geographical area or work group.
Note: Each zone must contain at least one channel.
Here's how to fill in the scan list:
1. At the CHANGE/VIEW MENU, press F3 and then F5 to access the
SCAN LIST screen. If "1" is not already displayed for Scan List
number, press F3 to see the previous list. If "1" is displayed,
proceed.
2. Press Tab to advance the prompt to the Member Zone field. Type
in the zone number of the channel to be scanned. For the
purposes of this tutorial, type "1". Press Enter to select this zone
number. The cursor will now be in the Channel field. Enter the
channel number to be scanned.
Repeat step 2 until all desired channels are entered.
3. If you have created more than one scan list, repeat this list for each
scan list.
When you are done, press Esc to return to the MAIN MENU.
33