Motorola MCS 2000 User Manual page 193

Field Definitions
Personality
Conversation Type
Auto Scan (not shown)
Proper Code Detect (not shown)
Talk Permit Tone
VRM100
System Wide Transmit
Use the UP/DOWN arrow keys to scroll through the available
personalities. Alternately the F3/F4 function keys can be used to
navigate through the available personalities.
Use the UP/DOWN arrow keys to select the Trunking Conversation
type. The available choices are:
Message After the initiator de-keys the radio, the voice channel stays
Trunked active (hangtime) so that other members of the talkgroup
can respond on the same channel. If a radio in the
talkgroup transmits during another user's transmission, he
or she will interrupt the original transmission.
Transmission No hangtime and no talk-over. When a radio is de-keyed,
Trunked the channel is immediately de-allocated and reassigned. If a
user tries to talk over an active channel, the radio will not
key until the channel is clear.
PTT- ID PTT-ID systems are similar to message conversation type
systems with hangtime and talk-over, but they send an ID
code to the controller when PTT is pressed. After
transmission of the ID, the radio goes back to the voice
channel to talk to the other users.
Use the UP/DOWN arrow keys to enable/disable the Auto Scan option
for this personality. When this feature is enabled, the radio will
automatically scan when on this personality. To use a scan on/off
switch or button, this option must be disabled.
The default is Disabled.
Use the UP/DOWN arrow keys to enable/disable this feature. When
this feature is enabled, the speaker will unmute on SECURE data only
if it is encrypted with the correct key.
Use the UP/DOWN arrow keys to enable/disable Talk Permit Tones.
When this feature is enabled, a Talk Permit Tone beep will be made
every time a transmission is made. The tone indicates that the user
may begin the talking.
The default is Enabled.
This field cannot be set to Enabled if the VRM500 Capable field on the
RADIO WIDE OPTIONS screen has been set to Enabled. Use the UP/
DOWN arrow keys to enable/disable the VRM100 option for the
current Trunking personality.
The default is Disabled.
Use the UP/DOWN arrow keys to Enable or Disable System Wide
Transmit.
When the System Wide Transmit field is set to Enabled, the user will
be allowed to enter 'SYS' (System Wide Talkgroup) into the talkgroup
list of the corresponding personality.
187