Secure Options - Motorola MCS 2000 User Manual

SECURE Options

DFCF
Function Key Descriptions
F3 - PREV PERS
F4 - NEXT PERS
Field Definitions
Personality
Secure/Clear Strapping
From the MAIN MENU, press F4, F6, F3 and then F6 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONV:PERS:SECURE
Personality........1 CONVENTIONAL SECURE PERSONALITY
-------------------------------
Secure/Clear Strapping.................Secure
XL Transmit.......................... Enabled
Scan Holdoff Strapping...................Both
Rx Modulation.................2 Level Receive
Proper Code Detect....................Enabled
Echo Mute Time (ms)........................
F1 F2 F3
HELP PREV NEXT
PERS PERS
This screen can be accessed only when a radio equipped with SECURE
hardware has been read. This screen permits access to SECURE
parameters linked to the current personality. Press Tab to select the
desired field, or press the desired function key (F1 - F10). If a field is
highlighted, use the UP/DOWN arrow keys to select the desired choice
or value.
Accesses the previous personality.
Accesses the next personality.
Use the UP/DOWN arrow keys to select the desired conventional
personality. The number may also be entered directly.
Note: Refer to the Radio Catalog Sheet for the maximum
number of personalities allowed for this model.
Use the UP/DOWN arrow keys to select the SECURE/Clear strapping
for this personality. This field configures the personality's transmit
mode. If this field is set to Clear or SECURE, the current personality is
forced to that particular transmit mode. When set to Select, the user is
allowed to select the SECURE or Clear transmit modes via the radio's
two-position concentric switch.
The factory default is Select (if switch is programmed for SECURE Tx
Select).
Use UP/DOWN Arrows to Select Choice.
F4 F5 F6 F7
0
F8 F9 F10
EXIT
209