Motorola MCS 2000 User Manual page 180

Call ID List
This Call ID (PC I)
This Call ID (PC II)
Scan List
174
This field will not be visible if the Operation field is set to Resp Only. Use
the UP/DOWN arrow keys to select the Call List ID for the current
personality. This is the number of the Call ID list that this personality
will use for Private Call. The Private Call and Call Alert features must have
a call list assigned for Unlimited and List operation. The Call ID List cannot
be set to None when Call Operation is List or Unlimited.
Note: Radio controls may require additional setup for your Private
Call configuration on the RADIO WIDE BUTTON/SWITCH MENU
(F4/F3/F3). Refer also to the TRUNKING WIDE CALL LIST (F4/
F4/F6) help screen.
The default is one list for each Trunking system.
This is the six-digit Private Call I ID of this radio.
This is the six-digit Private Call II ID of this radio.
Use the UP/DOWN arrow keys to select the Scan List to be used for this
personality. To change or view the scan list, select the SCAN MENU
(F4/F3/F5). Trunking personalities may use Subfleet, Priority Monitor
and Talkgroup type scan lists.
Note: Radio controls may require additional setup for your Scan
configuration on the RADIO WIDE BUTTON/SWITCH MENU (F4/
F3/F3). Refer to the RADIO WIDE MENU screen (F4/F3/F5).
The default is None.