Ge Star System - Motorola MCS 2000 User Manual

GE STAR System

DFGE
Function Key Descriptions
F2 - ADD SYS
F3 - PREV SYS
F4 - NEXT SYS
F5 - DELETE SYS
Field Definitions
System
Addressing Mode
248
From the MAIN MENU, press F4, F6, F7 and then F5 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
..CHANGE/VIEW:CONV:AUX:GE STAR SYSTEM
System.............1
Addressing Mode.........Extended
Radio ID....................0000
PTT ID Type..............Leading
PTT ID Sidetone.........Enabled
Pretime Duration (ms)........500
Baud Rate................400 bps
DOS......................Enabled
Unmute Hold-Off (ms)........550
Coast Time (ms).............100
F1 F2 F3
HELP ADD PREV NEXT
SYS SYS SYS
This screen allows you to change/view the parameters that pertain to
a GE STAR system. Press Tab to select the desired field, or press the
desired function key (F1 - F10). If a field is highlighted, use the UP/
DOWN arrow keys to select the desired choice or value.
Adds a system.
Accesses the previous system.
Accesses the next system.
Deletes a system. You will be prompted for confirmation before the
system is actually deleted.
Use the UP/DOWN arrow keys to select the desired GE STAR system.
or entered a number directly. You may also use the function keys to
scroll through the available choices. The radio may have a maximum
number of 7 systems.
Use the UP/DOWN arrow keys to select Normal or Extended. The state
of this field determines the range of valid IDs that the radio can use.
Specifies the GE STAR addressing mode for the Radio ID.
The default is Disabled.
Use UP/DOWN Arrows to Select Choice.
GE STAR SYSTEM
--------------
Emergency Alarm......... Enabled
Monitor w Sil Emer.....Disabled
Impolite Retries.............10
Revert Table
Num Zone Channel
----------------
1
2
3
F4 F5 F6 F7
DELETE
SYS
Blank Blank
Blank Blank
Blank Blank
F8 F9 F10
EXIT