Radio Wide Emergency Options - Motorola MCS 2000 User Manual

Radio Wide
Emergency Options
DCBG
Field Definitions
Silent Alarm
Unmute Option
100
From the MAIN MENU, press F4, F3, F2 and then F7 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
...CONFIG:RADIO OPTIONS:EMERG OPT

RADIO WIDE EMERGENCY OPTIONS

----------------------------
Silent Alarm.............Enabled
Unmute Option..........Enabled
Channel Delay (sec)............2
Emergency Power Up......Disabled
F1 F2 F3
HELP
This screen can be accessed only if the radio supports this option.
Emergency operation must be enabled on the CONVENTIONAL
PERSONALITY screen (F4/F6/F3) and/or the TRUNKING
PERSONALITY screen (F4/F4/F4). In addition, the Emergency button
must be configured from the RADIO WIDE BUTTON screen (F4/F3/
F3/F2). The Emergency parameters listed on this screen apply to both
Conventional and Trunking signalling.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is selected, press the UP/DOWN arrow keys to select
the desired choice or value.
This feature is not compatible with Emergency Receive. To enable Silent
Alarm, make sure Emergency Receive is disabled on the RADIO WIDE
DISPLAY OPTIONS screen (F4/F3/F6). Use the UP/DOWN arrow keys to
enable/disable this feature. If this feature is enabled, the radio will
operate silently when transmitting an emergency signal. No audible or
visual indication of the transmission will occur.
The default is Disabled.
Emergency operation must be enabled on the CONVENTIONAL MDC
SYSTEMS screen (F4/F6/F4/F3) and/or the TRUNKING PERSONALITY
EMERGENCY OPTIONS screen (F4/F4/F4/F8). In addition, the
Emergency button must be configured from the RADIO WIDE
BUTTON screen (F4/F3/F3/F2).
This feature is an optional ADDITION to the Emergency Silent Alarm
feature. Enabling this feature will cause the radio to UNMUTE on the
emergency talkgroup (for trunking) or frequency (for conventional)
for voice traffic when the radio is in SILENT ALARM EMERGENCY
mode. The Unmute Option will allow the dispatcher to provide
Use UP/DOWN Arrows to Select Choice.
F4 F5 F6 F7 F8 F9 F10
EXIT