Mdc Systems - Motorola MCS 2000 User Manual

MDC Systems

DFDC
Function Key Descriptions
F2 - ADD SYS
F3 - PREV SYS
F4 - NEXT SYS
F5 - DELETE SYS
F7 - MORE EMER OPTIONS
F9 - MORE OPTIONS
From the MAIN MENU, press F4, F6, F4 and then F3 to access this
screen.
MOTOROLA Radio Service Software
MCS Model:
MAIN:CHANGE/VIEW:CONV:MDC:SYSTEMS
MDC System.........1
Primary ID...................0001
Secondary ID.............00000000
Variable ID...................000
Leading PTT-ID............Enabled
PTT-ID Sidetone..........Enabled
Trailing PTT-ID...........Enabled
Radio Check...............Enabled
Radio Inhibit.............Enabled
Status....................Enabled
Status Request............Enabled
Message...................Enabled
F1 F2 F3 F4
HELP ADD PREV NEXT
SYS SYS SYS
This screen allows you to change or view parameters that pertain to an
MDC system. Press Tab to select the desired field, or press the desired
function key (F1 - F10). If a field is highlighted, use the UP/DOWN
arrow keys to select the desired choice or value.
Adds a system.
Accesses the previous system.
Accesses the next system.
Deletes the selected MDC system. You will be prompted for
confirmation before the system is actually deleted.
Brings up a screen where you can configure the MDC Emergency
Feature parameters in addition to the ones located on the MDC
SYSTEMS and MDC SYSTEM OPTIONS screens.
Allows you to change or view additional MDC system field parameters.
Use UP/DOWN Arrows to Select Choice.
MDC SYSTEMS
-----------
Emergency.................Enabled
Emergency Type.....Alarm and Call
Emer PTT ID Sidetone.....Enabled
Acknowledge Alert Tone...Enabled
Revert Table
Num Zone Channel
-----------------
1 1
2 1
3 1
F5 F6 F7
DELETE MORE EMER
SYS OPTIONS
1
1
1
F8 F9 F10
MORE EXIT
OPTIONS
225