Motorola MCS 2000 User Manual page 131

Field Definitions
Scan List
Scan Type
Conventional
Talkgroup
Priority Mon(itor)
Subfleet
Dynamic Priority
Priority 1 Type &
Priority 2 Type
Selected Chan
Fixed
OP/SEL
(Operator
Selectable)
Disabled
Use the UP/DOWN arrow keys to select a specific scan list, or use the
F3/F4 function keys to scroll through the lists. Each mode has a
unique scan list. Each Conventional and Trunking personality may
have a unique scan list. The scan lists defined on this screen are
assigned on the CONVENTIONAL and TRUNKING PERSONALITY
screens. Lists may be added by pressing the F2 key and the currently
highlighted list can be deleted using the F5 key.
The default is 1.
Use the UP/DOWN arrow keys to select the type of scan list. The
choices are:
May contain only Conventional personalities (up to 15 members).
May contain both Conventional and Trunked personalities from different
systems (up to 10 members).
May contain only Trunking personalities from the same Type II system (up
to 10 members).
If the SMARTNET Type I feature has been purchased, this type may contain
Trunking personalities from the same Type I system (up to 10 members).
May contain only Trunking personalities from the same Type I system (up
to 10 members).
The default is Conventional.
This field will be visible only if Scan Type is set to Conventional. When this
feature is enabled, the Priority 2 Type field will not be visible. Use the UP/
DOWN arrow keys to enable/disable Dynamic Priority. The last
channel transmitted on will become (and remain) the Second Priority
Channel until a new channel is transmitted on or scan is disabled. The
priority of the First Priority channel is not affected.
The default is Disabled.
This field is visible only if the Scan Type field is set to Conventional or
Priority Monitor. Use the UP/DOWN arrow keys to select the type of
Priority Scan the radio will use from among the following:
The radio will use the last selected channel as the Priority Member. First
priority and second priority may not both refer to the selected channel.
The radio uses a selected member of the scan list, set from the RSS, as the
Priority Channel. This member is fixed and cannot be programmed from the radio.
The radio uses a selected member of the scan list as the Priority Channel. The
user must select the member of the scan list to be used as the priority member.
This member can be programmed both from the RSS and the radio.
No Priority Channel will be allowed.
The default is Disabled.
125