Siemens Sinamics s120 Commissioning Manual page 309

Control Unit 320-2 PN while powering up
Table 4- 5
Red flashing
light 2 Hz
Red flashing
light 2 Hz
Red flashing
light 0.5 Hz
Table 4- 6
Orange
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Load software
LED
RDY PN
Red Orange
Red Red
Red
Red
flashing
light 2 Hz
Red Orange
flashing
light
Red Off
Off Red
Red flash-
ing light
0.5 Hz
Firmware
LED
RDY PN
Off
Alternating
Status
OPT
Orange Reset
Off BIOS loaded
Off BIOS error
Off File error
Off FW loading
Off FW loaded
Off FW checked
(no CRC error)
Off FW checked
(CRC error)
Status
OPT
Off Initializing
Running
4.1 Diagnostics via LEDs
Comment
Hardware reset
RDY LED lights up red, all other LEDs
light up orange
–
Error occurred while loading the BIOS
•
Memory card not inserted or faulty
•
Software on memory card not present
•
or corrupted
RDY LED lights up red, PN LED flashes
orange without fixed frequency
–
–
CRC invalid
•
Comment
–
See the table below
Diagnostics
309