Commissioning Of Simotics L-1Fn3 Linear Motors; Safety Instructions For Commissioning Linear Motors - Siemens Sinamics s120 Commissioning Manual

Commissioning

3.13 Commissioning of SIMOTICS L-1FN3 linear motors

3.13 Commissioning of SIMOTICS L-1FN3 linear motors
3.13.1

Safety instructions for commissioning linear motors

Danger to life as a result of unintended motor movement
Unexpected movements of the motor may cause death, serious injury (crushing) and/or
property damage.
• Do not work in the danger area while a machine is switched on.
• Keep persons away from moving parts and areas where there is a danger of crushing.
• Ensure the free axis travel path.
• Observe the instructions on commutation.
• Limit the motor currents.
• Set the speed limitation to small values.
• Monitor the end positions of the motor.
Risk of burn injuries on hot surfaces
Touching the surfaces of the motor can cause serious injury.
• Do not touch the motor during or immediately after operation.
• Attach the "Hot Surface Do Not Touch" (DW-026) warning sign close to the source of
Danger to life due to electric shock
Every movement of the primary part compared with the secondary part and vice versa
produces an induced voltage. If you touch cable connections, you could suffer an electric
shock, which can result in death or serious injury.
• Secure the primary section so that it cannot move before you touch the cable
• Connect the cable connections of the motor correctly and insulate them correctly.
182
WARNING
WARNING
danger where it can be easily seen.
WARNING
connections.
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5