Modem Initialization Setting Using Parameter Method - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
5.1.2

Modem initialization setting using parameter method

This subsection explains how to select the AT command for initialization registered in the PLC and how to set
the AT command for an unregistered modem.
1
Opening the PLC parameter setting window
In the project view area of the navigation window, double-click [Parameter]  [PLC Parameter].
If the navigation window is not displayed, select [View]  [Docking Window]  [Navigation] from
the menu bar.
2
Selecting the modem initialization method
Click the [PLC System(1)] tab on the dialog box.
Select a modem to be connected in "MODEM Initialized", and click the [End] button.
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Works2
I-27
A
B
C
D
E
F
G
H
I
Apx.A