Connection Setting For Personal Computer - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Programming Communication
6.

Connection Setting for Personal Computer

This chapter explains the setting method for connecting a personal computer and a PLC.
GX Works2, GX Developer and FXGP/WIN for Windows, are applicable. The setting method is different in the
software packages.
For details on GX Developer operating procedure, refer to GX Developer Operating Manual.
6.1 Connection Setting (GX Works2)
GX Works2, Windows software for personal computers, has the following items to be set. Set each item
according to the connection status.
• RS-232C, USB, Ethernet
• Communication port
• Transmission speed
• This setting is required to use the transparent function in the GOT (described later).
• Communication time check
• Number of retries
Each set item can be checked and changed on the Transfer Setup dialog box.
This section explains the setting using communication in accordance with RS-232C and USB. For connection
and setting of the FX
In the project view area of the navigation window, double-click [Connection Destination View]
destination data name] to display the dialog box shown below.
Point
In GX Works2, [Transfer Setup] can be selected even while the monitor function window is open.
-ENET-ADP, refer to the FX
3U
6 Connection Setting for Personal Computer
-ENET-ADP User's Manual.
3U
6.1 Connection Setting (GX Works2)

[Connection
H-41
A
B
C
D
E
F
G
H
I
Apx.A