Mitsubishi Electric FX3U-232-BD User Manual page 479

FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
Error
code
(DEC)
261 Overrun error
262 Undefined
263 Character error
264 Undefined
265 Undefined
266 Mode error
267 Instruction code error
268 Data range error
269 Undefined
270 Undefined
271 Undefined
*1. This error code is supported only in FX
Contents of error
Inverter sent the error code H5.
Before receiving the completed data in the inverter, the computer
sent the next set of data.
Inverter sent the error code H6.
Not defined currently in inverter.
Inverter sent the error code H7.
An unused character (other than 0 to 9, A to F and control codes)
was received.
Inverter sent the error code H8.
Not defined currently in inverter.
Inverter sent the error code H9.
Not defined currently in inverter.
Inverter sent the error code HA.
A parameter was written in a mode other than computer link mode,
or while the inverter was operating.
Inverter sent the error code HB. Instruction code error.
Non-existing instruction code was specified.
Inverter sent the error code HC.
In writing a parameter or operation frequency, data outside the
allowable range was specified.
Inverter sent the error code HD.
Not defined currently in inverter.
Inverter sent the error code HE.
Not defined currently in inverter.
Inverter sent the error code HF.
Not defined currently in inverter.
/FX /FX
3S 3G
/FX /FX PLCs.
3GC 3U 3UC
11 Troubleshooting
11.6 Error Codes
A
Inverter
operation
When errors
have occurred
B
consecutively
beyond the
allowable
number of
retries, inverter
is brought to an
alarm stop.
C

Inverter does
not accept
received data,
but is not
brought to an
D
alarm stop.

E
Inverter does
not accept
received data,
but is not
brought to an
alarm stop.
F

G
H
I
Apx.A
E-137