Communication Settings Using Parameter Method (Fxgp/Win) - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Computer Link
5.3

Communication Settings Using Parameter Method (FXGP/WIN)

Communication settings may be changed by the parameter method with GX Works2, GX Developer,
FXGP/WIN for Windows and FX-30P handy programming panel. This section describes how to change
parameters with FXGP/WIN.
Ch2 cannot be set using FXGP/WIN.
For details on GX Developer operating procedure, refer to GX Developer Operating Manual.
5.3.1 Operating procedure
This subsection explains the serial communication setting method. Suppose that FXGP/WIN is already
started up.
1
Displaying the serial setting (parameter)
Select [Option]  [Serial setting (parameter)] from the toolbar.
The following dialog box appears according to absence/presence of parameter setting.
1. When there are no parameter settings
There are no communication settings. Click the [Yes] button.
For details on GX Works2 operating procedure, refer to section 5.2.
For details on FX-30P operating procedure, refer to FX-30P Operation Manual.
5 Communication Setting in FX Programmable Controller
5.3 Communication Settings Using Parameter Method (FXGP/WIN)
A
B
C
D
E
F
G
H
I
Apx.A
D-43