Mitsubishi Electric FX3U-232-BD User Manual page 229

FX Series PLC User's Manual - Data Communication Edition
Parallel Link
2) Sending devices for the slave station
These devices are used for sending the information from the slave station to the master station.
To prevent malfunctions, do not change the setting of these devices in the master station.
The device numbers used and number of devices vary depending on the PLC type. For applicable
devices, refer to the tables below.
a) For FX (FX), FX
2
Word device
b) For FX
0N
Word device
, FX , FX , FX
2C 1N 1NC
Number of
Device
devices
D500, D501
, FX or FX Series
1S 3S
Number of
Device
devices
D240, D241
, FX , FX , FX , FX
2N 2NC 3G 3GC
The devices in the master station are automatically updated
2
to the status of devices in the slave station.
The devices in the master station are automatically updated
2
to the status of devices in the slave station.
7 Creating Programs
7.2 High Speed Parallel Link Mode
or FX Series
3U 3UC
Description
Description
A
B
C
D
E
F
G
H
I
Apx.A
C-43