For Fxgp/Win - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
7.2.2

For FXGP/WIN

This subsection explains the line connection procedure using FXGP/WIN. Prepare for connection of the PLC,
connect a modem to the communication port in the personal computer, and then start up FXGP/WIN.
1
Setting the modem to be used
Select [Remote]  [Environment]  [Modem] from the toolbar to display the following dialog box.
Select the modem to be used, and click the [OK] button.
If the modem to be used is not displayed, click the [New Entry] button, and register the AT
command for the modem.
2
Connecting the connection destination
Select [Remote]  [Connect]  [to PLC] from the toolbar to display the following dialog box.
Select the connection destination, and click the [OK] button.
If the connection destination is not displayed, click the [New Entry] button, and register the
connection destination.
When directly setting a telephone number, click the [Manual] button.
For details on AT command registration, refer to Subsection 6.2.1.
For details on connection destination registration, refer to Subsection 6.2.2.
7 Connecting Line
7.2 Line Connection Procedure
Proceed to step 4.
Proceed to the next step.
I-51
A
B
C
D
E
F
G
H
I
Apx.A