Applicable Fx Plc And Communication Equipment - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (RS/RS2 Instruction)
3.2

Applicable FX PLC and Communication Equipment

Select a communication equipment combination, and put a check mark in the "Check" column.
During selection, pay attention to the following:
- In the table below, only the external dimensions are different between the units shown in "FX
FX -485ADP". Select either one.
0N
- In the table below, only the outside dimensions and D-SUB connector shape are different between units
shown in "FX
- In the table below, only the cable is different between the units shown in "FX
RJ". Select either one.
- Non-protocol communication is not provided for the FX
3.2.1 For communication in accordance with RS-232C
FX Series
FX
0N
FX
1S
FX
1N
F-16
-232ADP/FX -232ADP". Select either one.
2NC 0N
Communication equipment (option)
FX -232ADP
2NC
(9-pin D-Sub, male)
+
FX -CNV-BD FX -232ADP
1N 2NC
(9-pin D-Sub, male)
+
FX -CNV-BD FX -232ADP
1N 2NC
(9-pin D-Sub, male)
, FX , FX
1 0
FX -232ADP
0N
(25-pin D-Sub, female)
FX -232-BD
1N
(9-pin D-Sub, male)
+
FX -CNV-BD FX
1N
(25-pin D-Sub, female)
FX -232-BD
1N
(9-pin D-Sub, male)
+
FX -CNV-BD FX
1N
(25-pin D-Sub, female)
3 System Configuration and Selection
3.2 Applicable FX PLC and Communication Equipment
-485-BD/FX
3G
PLCs.
0S
Total extension
distance
15 m
(49' 2")
15 m
(49' 2")
15 m
(49' 2")
-232ADP
0N
15 m
(49' 2")
15 m
(49' 2")
-232ADP
0N
-485ADP/
2NC
-485-BD-
3G
Check