Configuring Voice Mail Preferences - Avaya Aura 5300 User Manual

MPEG4 custom video
configuration
5. Click OK.
Both clients in a call must support MPEG4 video CODEC in order to send and receive.
However, if either client does not have MPEG4, then H.263 video is sent.
The following table lists the MPEG4 Codec Quality Settings default values.
Setting
Bitstream
Key Frame Interval
Video Fluidity
Enable four motion vectors for each
macroblock
Improve Resistance to Packet Loss
Dynamic Resolution Conversion

Configuring voice mail preferences

About this task
You can customize how the Avaya Aura
mail server by configuring your voice mail preferences.
Tip:
Access to the voice mail settings depends on whether the voice mail service is assigned to you.
If you do not have support for voice mail, you cannot alter the voice mail settings.
Use this procedure to configure your network-based voice mail access.
Procedure
1. Select Multimedia > Preferences and then select the Voice Mail list item.
The Voice Mail preferences appear.
2. Type the voice mail phone number of your voice mail system in the Voice Mail Phone
Number box without punctuation.
Remember to enter any extra digits required by your organization's phone network.
3. Enter the Mailbox ID and the pound (#) symbol, if required.
4. Enter your Password and the pound (#) symbol, if required.
October 2017
Description
Note:
This option requires backchannel information sent to the
encoder.
Very Low
8
10
100
N
Y
N
®
AS 5300 Office Client operates when contacting your voice
®
Avaya Aura Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
Configuring your preferences
Low Medium
64 192
10 8
100 100
N Y
Y Y
N N
High High
Very
512 768
8 8
100 100
Y Y
Y Y
N N
91