System Configuration; Starting The Configuration Browser - Bosch BIS 2.3 Installation Manual

24 en | System configuration
4

System configuration

The installed BIS software and its integrated engines cannot be
used until the system has been configured. Configuration
means adapting the system to a particular client's environment
individual requirements.
It is possible create multiple different configurations,
nevertheless only one can be activated, i.e. loaded, at any one
time.
NOTICE!
i
In the case of Access Engine, the configuration selected in the
Configuration Browser must also be loaded so that the specific
applications can be called.
4.1

Starting the Configuration Browser

To create a system configuration or to modify an existing one,
you must first start the Configuration Browser.
To start the Browser proceed as follows:
1.
2.
3.
NOTICE!
i
To create a new configuration, first carry out the steps
described in Section 4.2 Setting up a configuration, Page 25.
1.
F.01U.028.713 | V 2.3.0.1 | 2009.11
If the BIS Manager has not yet been started:
– Start the BIS Manager by double-clicking the desktop
icon.
– Log in with your username and password.
On the System start/stop tab, click the Start button to the
left-hand side of the Configuration Browser label
A new window is opened for creating and reopening
configurations. Select the configuration you require in the
Recent configuration field by clicking the corresponding
entry.
Another login dialog appears; log in with an Administrator
username and password.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH