Setting Up A Configuration; Creating An Initial Configuration - Bosch BIS 2.3 Installation Manual

BIS 2.3 - Access Engine
The Configuration Browser is started and can be used as far as
the user's authorization allows, to edit or view the current
configuration.
4.2

Setting up a configuration

With Access Engine there is a difference between the creation
of an initial configuration and adding additional configurations.
4.2.1

Creating an initial configuration

Once the BIS software has been installed as described in the
BIS installation manual, a client-specific configuration can be
created using the Configuration Browser. Once the settings
specified in this configuration have been made, the BIS system
is ready for use and can be started.
To create the first configuration proceed as follows:
1.
2.
3.
4.
5.
6.
Bosch Sicherheitssysteme GmbH
Make sure that the hardware dongle is plugged in.
Start the BIS Manager by double-clicking its desktop icon.
Log in with your username and password.
Call the License page.
– The serial number and order number of the hardware
dongle are displayed in the Dongle information field.
You can call up this information again by clicking the
Update button to make sure that the dongle is being
read correctly.
– The contents of the license file that is currently loaded
are displayed in the License information list field.
After the installation, this field does not generally
contain any information. Click the Import button in
the Import license file field to search for and import
the directory containing the license file.
The serial and order numbers displayed in the list field
must match the specifications of the hardware
dongle.
Switch to the System start/stop page and click the Start
button to the left of the Configuration Browser entry.
The Recent configurations field in the configuration
selection window of the Configuration Browser does not
Installation manual
System configuration | en
F.01U.028.713 | V 2.3.0.1 | 2009.11
25