Bosch BIS 2.3 Installation Manual page 26

26 en | System configuration
7.
8.
9.
10. A message then appears telling you that the
NOTICE!
As this is the initial configuration of the system, it is
i
automatically loaded. Later when multiple configurations exist
they will need to be explicitly loaded using the Configuration
Browser Load/save configuration tab.
The Configuration Browser is opened initially displaying the
standard License page in the Administration menu.
F.01U.028.713 | V 2.3.0.1 | 2009.11
yet contain any entries - therefore select the New
configuration entry in the Configuration management
field.
Another dialog is opened offering a choice of pre-installed
default configurations.
– Select the Access Engine entry in the Group field and
confirm with OK.
– For the new configuration, you must first create a new
folder in the Customer Configuration directory.
Rename the folder as desired.
– When you confirm the new directory structure, the
default values of the Access Engine configuration are
copied into this folder.
– Confirm the message that appears regarding the
update of the version with Yes.
Clicking a configuration in the Configuration Browser
brings up the Operator logon window. Log on with the
user data of the preinstalled Administrator user or the BIS
user.
Two messages appear regarding the synchronization of the
platform; confirm both messages with Yes.
synchronization was successful; confirm this message with
OK.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH