Connecting The Controllers; General - Bosch BIS 2.3 Installation Manual

BIS 2.3 - Access Engine
7

Connecting the controllers

This chapter describes the connection variants for controllers.
With distributed systems (see Section 3.2 Distributed system),
the controller is connected to the remote or connection server.
7.1

General

The AMC2 4W controller will be connected to the host system
via Ethernet, only.
Bosch Sicherheitssysteme GmbH
Connecting the controllers | en
Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
65