BIS 2.3 - Access Engine
future date, but the standard installation does not allow an
authorization to be backdated (i.e. to start in the past). This
default can be overriden by changing the system parameter
AuthorizeValidFromInPast in the topic CardData.
9.7
Valid-From Date for Lockouts
As with authorizations, lockouts can not normally be set to
begin in the past. This default can be overriden by changing the
system parameter LockoutValidFromInPast in the topic
CardData.
9.8
Visitor Profiles Only
In the default configuration you can assign visitor authorizations
by two ways:
–
–
To decrease the risk of error this second possibility can be
diabled by setting the parameter DisableStuffAuth of the topic
Visitors to true. Now only profiles can be choosen.
NOTICE!
i
Make sure that Visitor access profiles do exist, because only
visitor profiles can be selected in the Visitors dialog.
Bosch Sicherheitssysteme GmbH
Choosing an Access Profile which is marked as a Visitor
Profile.
Assigning the available Access Authorization separately.
Installation manual
Setting System Parameters with SPEdit | en
F.01U.028.713 | V 2.3.0.1 | 2009.11
77