Configuring Internet Explorer - Bosch BIS 2.3 Installation Manual

BIS 2.3 - Access Engine
2.
NOTICE!
i
When created each new workstation receives the default profile
WP-Administrator which allows use of all dialogs on the
workstation.
If you would like to assign a different (non-default) user profile
to this workstation please proceed as follows:
Change to the dialog ACE Workstation Rights.
NOTICE!
i
For information about the functionality and the installation of
additional profiles, see Section 6.2 User and workstation profiles,
Page 49.
5.1.3

Configuring Internet Explorer

Internet Explorer needs to be configured for each new
workstation. This is begun by right clicking on the IE desktop
icon and selecting Properties, or, in an open Internet explorer,
clicking Internet options in the tools menu.
Bosch Sicherheitssysteme GmbH
In the Administration menu switch to the ACE
Workstations dialog.
– Select the node DMS in the explorer of this dialog.
– Add a new entry by clicking the + button above the list
field.
– Enter the DHCP name and/or the IP address of the
new workstation.
– Save your entries by clicking the Apply button.
– Select the new workstation in the upper list window
– Remove thecurrently assigned profile from the
workstation by double-clicking on it in the left column.
– Assign at least one of the available profiles by double-
clicking on it in the right hand column, or selecting the
desired profile and clicking the < button.
Installation manual
Setting up additional workstations | en
F.01U.028.713 | V 2.3.0.1 | 2009.11
35