Creating The Controllers In The Device Editor - Bosch BIS 2.3 Installation Manual

66 en | Connecting the controllers
7.1.1

Creating the controllers in the device editor

Configuration is performed in the Configuration Browser. Start
the Configuration Browser as described in Section 4.1 Starting
the Configuration Browser, Page 24.
1.
1.
2.
3.
NOTICE!
In principle, you can give the controllers any name you want
and can use the default values of the device editor as well.
i
However, you should always be able to identify the controllers,
therefore we recommend names that clearly indicate the
controller's location and usage (e.g. Elevator 1 in Building 2, or
Parking lot west) .
F.01U.028.713 | V 2.3.0.1 | 2009.11
In the Connections menu, open the device data editor by
clicking the Access Engine explorer entry.
A controller can only be created directly under the MAC
node.
Once you have selected the MAC entry, select the New
Object option in the context menu (right mouse button)
and click the New button in the dialog toolbar.
Select an controller from the list.
Enter the connection parameters for the controller in the
relevant fields - for more information, see the online help
for the Access Engine configuration.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH