Bosch BIS 2.3 Installation Manual page 114

114 en | MAC - Main Access Controller
Reset restart count
Start task
Restart task
Stop task
Shutdown MAC
The left-hand field Processes, and the right-hand field Consoles
display all the MAC processes. This list corresponds to the
entries in the process table. Process which are commented out,
or not listed there, will not be displayed.
By selecting a process in the left hand list you display details
about that process in the middle fields. The upper middle field
System process info displays operating system information
regarding the selected process, e.g. Parent PID and PID, as
may be seen also in the Windows Task Manager.
NOTICE!
i
If ParentID is missing this means that the MAC was started
manually via the .exe file.
As the Master is started by MacProcessControl.exe its PID ios
the Parent PID of the Master. All other MAC processes have the
Master's PID for their parent.
The Executable field shows the running executable and its
path.
The field MAC process info shows those parameters and
options listed in the process table. In addition it shows the last
startup time and the number of starts since the last system
F.01U.028.713 | V 2.3.0.1 | 2009.11
Resets the restart count to "0".
Starts the selected process (only
active if the process is not running
already).
Halts and restarts the selected
process (only active if the process is
already running ).
Halts the selected process (only
active if the process is already
running ).
Halts all MAC processes. This is
equivalent to halting the Master.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH