BIS 2.3 - Access Engine
The corresponding messages also appear when shutting down
the system:
Figure 10.4 Messages on system shutdown
The start and end of batch processes can also be controlled:
Figure 10.5 Messages for batch processes
However, the console window displays only messages that
appeared since the last start of the master. All messages are
also saved in the corresponding log files however, so that they
can also be viewed after restarting the master.
Function overview
Each console window has a pool of commands and functions
with which additional information can be requested and
process controls can be undertaken.
Bosch Sicherheitssysteme GmbH
DMS - Data Management System | en
Installation manual
F.01U.028.713 | V 2.3.0.1 | 2009.11
83