Remote- And Login-Server; Backup; Restore - Bosch BIS 2.3 Installation Manual

138 en | Backup and Restore
13.2

Remote- and Login-Server

13.2.1

Backup

The Backup can be started using the BIS manager running on
the Login Server and is the same like described for the
Standalone Server.
On the Login-Server the system components installed on this
computer will be saved in the folder C:\Backup (= default
installation path).
At the same time the Remote-Server gets an order to create a
local backup. The DMS process Backup will be started and
saves the backup file named ACEyyyymmdd.gz (with the actual
date) and the folder CardholderImages (with the pictures from
the persons of the access control system) and Layouts (with
the layouts created by the badge designer) into the folder
C:\MgtS\Access Engine\AC\Backup (= default installation
path).
NOTICE!
i
The system administrator has to save these files separately.
13.2.2

Restore

The restore of the configuration must be done on both
computers - the Login and the Remote Server.
Login Server
First stop the BIS manager and start the restoring of the BIS
configuration clicking the Restore button on the tab Backup/
Restore configuration. The procedure is the same as for the
Standalone-Server.
Remote Server
–
F.01U.028.713 | V 2.3.0.1 | 2009.11
Take care that the Access Engine system is running.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH