Summary Of Parameter Settings; 00 Drive Parameters; Chapter 11 Summary Of Parameters - Delta CP2000 Series User Manual

Chapter 11 Summary of Parameter Settings
This chapter provides summary of parameter settings for user to gather the parameter setting ranges,
factory settings and set parameters. The parameters can be set, changed and reset by the digital keypad.
NOTE
1) : the parameter can be set during operation
2) For more detail on parameters, please refer to Ch12 Description of Parameter Settings.

00 Drive Parameters

IM: Induction Motor; PM: Permanent Magnet Motor
NOTE
Pr.
00-00 Identity code of the AC motor drive
Explanation
Chapter 11 Summary of Parameter SettingsCP2000
Settings
4: 230V, 1HP (0.75kW)
5: 460V, 1HP (0.75kW)
6: 230V, 2HP (1.5kW)
7: 460V, 2HP (1.5kW)
8: 230V, 3HP (2.2kW)
9: 460V, 3HP (2.2kW)
10: 230V, 5HP (3.7kW)
11: 460V, 5HP (3.7kW)
12: 230V, 7.5HP (5.5kW)
13: 460V, 7.5HP (5.5kW)
14: 230V, 10HP (7.5kW)
15: 460V, 10HP (7.5kW)
16: 230V, 15HP (11kW)
17: 460V, 15HP (11kW)
18: 230V, 20HP (15kW)
19: 460V, 20HP (15kW)
20: 230V, 25HP (18.5kW)
21: 460V, 25HP (18.5kW)
22: 230V, 30HP (22kW)
23: 460V, 30HP (22kW)
24: 230V, 40HP (30kW)
25: 460V, 40HP (30kW)
26: 230V, 50HP (37kW)
27: 460V, 50HP (37kW)
28: 230V, 60HP (45kW)
29: 460V, 60HP (45kW)
30: 230V, 75HP (55kW)
31: 460V, 75HP (55kW)
11-1
Factory
Setting
Read
only