Gsd File; Rtu-Pd01 Settings And Configurations; Rtu-Pd01 Settings - Delta RTU-PD01 Operation Manual

PROFIBUS DP Slave Communicaion Module RTU-PD01
7

GSD File

The GSD file is a text file and can be used to identify PROFIBUS DP device (master or slave).A GSD
file usually contains the supplier's information, baud rates supported and applicable I/O messages.
When using RTU-PD01, you have to first import the GSD file to the configuration software for
PROFIBUS DP master. After the import of the file, the configuration software for master will display
RTU-PD01 and its configuration settings. You can download the GSD file for RTU-PD01 at Delta's
website: http://www.delta.com.tw/
8

RTU-PD01 Settings and Configurations

8.1 RTU-PD01 Settings

When you set up RTU-PD01 in the configuration software for PROFIBUS DP master, there will be
plenty of setup items for you to choose from, which adds flexibility to the manipulation of RTU-PD01.
See the figure below for RTU-PD01 settings.
Definitions of settings:
Setup item
Acceleration mode
8
Setting
Enable
Disable
Definition
When the Modbus device is configured with
many addresses and the addresses are
consecutive, all contents in the consecutive
addresses can be read or written at a time.
When the Modbus device is configured with
many addresses, only contents in a single
address can be read or written.
DVP-PLC Operation Manual