Alcatel-Lucent 7450 ESS-12 Configuration Manual page 83

router router-instance — Specify the router name or service ID.
Values
Default
traceroute
Syntax traceroute {ip-address | dns-name} [ttl ttl] [wait milliseconds] [no-dns] [source ip-address] [tos
type-of-service] [router router-instance]
Context <GLOBAL>
Description
The TCP/IP traceroute utility determines the route to a destination address. Note that aborting a traceroute
with the <Ctrl-C> command could require issuing a second <Ctrl-C> command before the prompt is
returned.
A:ALA-1# traceroute 192.168.xx.xx4
traceroute to 192.168.xx.xx4, 30 hops max, 40 byte packets
1 192.168.xx.xx4 0.000 ms
A:ALA-1#
Parameters ip-address | dns-name — The remote address to traceroute. The IP address or the DNS name (if DNS name
resolution is configured) can be specified.
Values
ttl ttl — The maximum Time-To-Live (TTL) value to include in the traceroute request, expressed as a
decimal integer.
Values
wait milliseconds — The time in milliseconds to wait for a response to a probe, expressed as a decimal
integer.
Default
Values
no-dns — When the no-dns keyword is specified, a DNS lookup for the specified host name will not be
performed.
Default
source ip-address — The source IP address to use as the source of the probe packets in dotted decimal
notation. If the IP address is not one of the device's interfaces, an error is returned.
tos type-of-service — The type-of-service (TOS) bits in the IP header of the probe packets, expressed as a
decimal integer.
Values
router router-instance — Specifies the router name or service ID.
Page 102
router-name: Base, management
service-id: 1 — 2147483647
Base
0.000 ms
ipv4-address
dns-name 128 characters maximum
1 — 255
5000
1 — 60000
DNS lookups are performed
0 — 255
7450 ESS OS Basic System Configuration Guide
0.000 ms
a.b.c.d