Alcatel-Lucent 7450 ESS-12 Configuration Manual page 381

CRON Commands
cron
Syntax cron
Context config
Description This command creates the context to create scripts, script parameters and schedules which support the
Service Assurance Agent (SAA) functions.
CRON features are saved to the configuration file on both primary and backup control modules. If a control
module switchover occurs, CRON events are restored when the new configuration is loaded. If a control
module switchover occurs during the execution of a cron script, the failover behavior will be determined by
the contents of the script.
action
Syntax [no] action action-name [owner action-owner]
Context config>cron
config>cron>sched
Description
This command configures action parameters for a script.
Default none
Parameters action action-name — Specifies the action name.
Values
owner action-owner — Specifies the owner name.
Default
expire-time
Syntax expire-time {seconds | forever}
Context config>cron>action
Description
This command configures the maximum amount of time to keep the results from a script run.
Parameters seconds — Specifies the maximum amount of time to keep the results from a script run.
Values
Default
forever — Specifies to keep the results from a script run forever.
Page 352
Maximum 32 characters.
TiMOS CLI
1 — 21474836
3600 (1 hour)
7450 ESS OS Basic System Configuration Guide