Nonstop Forwarding; Nonstop Routing (Nsr); Figure 11: Synchronization Reference Selection - Alcatel-Lucent 7450 ESS-12 Configuration Manual

Nonstop Forwarding

In a control plane failure or a forced switchover event, the router continues to forward packets
using the existing stale forwarding information. Nonstop forwarding requires clean control plane
and data plane separation. Usually the forwarding information is distributed to the IOMs.
Nonstop forwarding is used to notify peer routers to continue forwarding and receiving packets,
even if the route processor (control plane) is not working or is in a switch-over state. Nonstop
forwarding requires clean control plane and data plane separation and usually the forwarding
information is distributed to the line cards. This method of availability has both advantages and
disadvantages. Nonstop forwarding continues to forward packets using the existing stale
forwarding information during a failure. This may cause routing loops and black holes, and also
requires that surrounding routers adhere to separate extension standards for each protocol. Every
router vendor must support protocol extensions for interoperability.

Nonstop Routing (NSR)

With NSR on the 7450 ESS-Series routers devices, routing neighbors are unaware of a routing
process fault. If a fault occurs, a reliable and deterministic activity switch to the inactive control
complex occurs such that routing topology and reachability are not affected, even in the presence
of routing updates. NSR achieves high availability through parallelization by maintaining up to
date routing state information, at all times, on the standby route processor. This capability is
achieved independently of protocols or protocol extensions, providing a more robust solution than
graceful restart protocols between network routers.
The NSR implementation on the 7450 ESS-Series routers supports all routing protocols. NSR
makes it possible to keep the existing sessions (LDP, OSPF, etc.) during a CPM switchover,
including support for MPLS signaling protocols. Peers will not see any change.
Protocol extensions are not required. There are no interoperability issues and there is no need to
define protocol extensions for every protocol. Unlike nonstop forwarding and graceful restart, the
forwarding information in NSR is always up to date, which eliminates possible blackholes or
forwarding loops.
Traditionally, addressing high availability issues have been patched through non-stop forwarding
solutions. With the implementation of NSR, these limitations are overcome by delivering an
intelligent hitless failover solution. This enables a carrier-class foundation for transparent
networks, required to support business IP services backed by stringent SLAs. This level of high
availability poses a major issue for conventional routers whose architectural design limits or
prevents them from implementing NSR.
7450 ESS OS Basic System Configuration Guide
System Management
Page 223