Alcatel-Lucent 7450 ESS-12 Configuration Manual page 492

===============================================================================
peer
Syntax peer ip-address [lag lag-id]
Context show>redundancy>multi-chassis>mc-lag
Description This command enables the context to display mc-lag peer-related redundancy information.
Parameters ip-address — Shows peer information about the specified IP address.
lag lag-id — Shows information for the specified LAG identifier.
Values
Output Show Redundancy Multi-chassis MC-Lag Peer Output — The following table describes show
redundancy multi-chassis mc-lag peer output fields:
Last Changed
Admin State
Oper State
KeepAlive
Hold On Ngbr Fail-
ure
Sample Output
A:subscr_mgt# show redundancy multi-chassis mc-lag peer 10.10.10.30
===============================================================================
Multi-Chassis MC-Lag Peer 10.10.10.30
===============================================================================
Last Changed
Admin State
KeepAlive
-------------------------------------------------------------------------------
Lag Id Lacp Key Remote Lag Id System Id
-------------------------------------------------------------------------------
1
2
-------------------------------------------------------------------------------
Number of LAGs : 2
===============================================================================
A:subscr_mgt#
Page 454
1 — 20020064
Label
Displays date and time of the last mc-lag peer.
Displays the administrative state of the mc-lag peer.
Displays the operation state of the mc-lag peer.
Displays the length of time to keep alive the mg-lag peer.
Specifies how many "keepalive" intervals the standby SR will wait for
packets from the active node before assuming a redundant-neighbor
node failure.
: 01/23/2007 18:20:13
: Up
: 10 deci-seconds
1 1
2 2
Description
Oper State
Hold On Ngbr Failure : 3
Sys Prio Last Changed
00:00:00:00:00:01 1
00:00:00:00:00:02 2
7450 ESS OS Basic System Configuration Guide
: Up
01/23/2007 18:20:13
01/24/2007 08:53:48