Persistence - Alcatel-Lucent 7450 ESS-12 Configuration Manual

Persistence

Optionally, the BOF
indexes when a save command is executed. During a subsequent boot, the index file is read along
with the configuration file. As a result, a number of system indexes are preserved between reboots,
including the interface index, LSP IDs, path IDs, etc If persistence is not required and the
configuration file is successfully processed, then the system becomes operational. If persist is
required, then a matching
can become operational. Matching files (configuration and index files) must have the same
filename prefix such as
a save command is executed. Note that the persistence option must be enabled to deploy the
Network Management System (NMS). The default is off.
Traps, logs, and console messages are generated if problems occur and SNMP shuts down for all
SNMP gets and sets, however, traps are issued.
Page 168
parameter can specify whether the system should preserve system
persist
file must be located and successfully processed before the system
x.ndx
and
test123.cfg
7450 ESS OS Basic System Configuration Guide
and are created at the same time when
test123.ndx