Saving A Configuration To A Different Filename; Rebooting - Alcatel-Lucent 7450 ESS-12 Configuration Manual

Saving a Configuration to a Different Filename

Save the current configuration with a unique filename to have additional backup copies and to edit
parameters with a text editor. You can save your current configuration to an ASCII file.
Use either of the following CLI syntax to save a configuration to a different location:
CLI Syntax: bof# save [cflash-id]
Example
or
CLI Syntax: admin# save [file-url] [detail] [index]
Example

Rebooting

When an admin>reboot command is issued, routers with redundant CPM are rebooted as well as
the IOMs. Changes are lost unless the configuration is saved. Use the admin>save file-url com-
mand to save the current configuration. If no command line options are specified, the user is
prompted to confirm the reboot operation.
Use the following CLI syntax to reboot:
CLI Syntax: admin# reboot [active|standby] [now]
Example
All rights reserved. All use is subject to applicable
license agreements.
....
Page 186
:
A:ALA-1# bof
A:ALA-1>bof# save cf3:
A:ALA-1>bof#
:
A:ALA-1>admin# save cf3:\testABC.cfg
Saving config.# Saved to cf3:\testABC.cfg
... complete
A:ALA-1#
:
A:ALA-1>admin# reboot
A:DutA>admin# reboot
Are you sure you want to reboot (y/n)? y
Resetting...OK
Alcatel 7xxx Boot ROM. Copyright 2000-2007 Alcatel-Lucent.
7450 ESS OS Basic System Configuration Guide