Ntp - Alcatel-Lucent 7450 ESS-12 Configuration Manual

Authentication-key
This command configures an authentication key-id, key type, and key used to authenticate NTP
PDUs sent to and received from other network elements participating in the NTP protocol. For
authentication to work, the authentication key-id, authentication type and authentication key value
must match.
CLI Syntax: config>system>time>ntp
Example
The following example shows NTP disabled with the
A:sim1>config>system>time>ntp# info
----------------------------------------------
----------------------------------------------
A:sim1>config>system>time>ntp#
Broadcast
The
broadcast
CLI Syntax: config>system>time>ntp
Example
The following example in the
command configured.
A:sim1>config>system>time# info detail
----------------------------------------------
Page 260
authentication-key key-id {key key} [hash | hash2] type
{des|message-digest}
:
config>system>time>ntp#
config>system>time>ntp# authentication-key 1 key A type des
config>system>time>ntp# no shutdown
shutdown
authentication-key 1 key "OAwgNUlbzgI" hash2 type des
command is used to transmit broadcast packets on a given subnet.
broadcast [router router-name] {interface
ip-int-name> [key-id key-id]
[ttlttl]
:
config>system>time>ntp#
config>system>time>ntp# broadcast interface int11 version 4
ttl 127
config>system>time>ntp# no shutdown
system>time

ntp

no shutdown
authentication-check
ntp-server
broadcast interface int11 version 4 ttl 127
exit
authentication-key
context shows NTP enabled with the
7450 ESS OS Basic System Configuration Guide
parameter enabled.
[version version]
broadcast