Alcatel-Lucent 7450 ESS-12 Configuration Manual page 82

Parameters seconds — The number of seconds for the console session to sleep, expressed as a decimal integer.
Default
Values
ssh
Syntax ssh [ip-addr | dns-name |username@ip-addr] [-l username] [-v SSH-version] [router router-
instance| service-name service-name]
Context <GLOBAL>
Description This command initiates a client SSH session with the remote host and is independent from the administra-
tive or operational state of the SSH server. However, to be the target of an SSH session, the SSH server must
be operational.
Quitting SSH while in the process of authentication is accomplished by either executing a ctrl-c or "~." (tilde
and dot) assuming the "~" is the default escape character for SSH session.
Parameters ip-address | host-name — The remote host to which to open an SSH session. The IP address or the DNS
name (providing DNS name resolution is configured) can be specified.
-l user — The user name to use when opening the SSH session.
router router-instance — Specify the router name or service ID.
Values
Default
telnet
Syntax telnet [ip-address | dns-name] [port] [router router-instance]
Context <GLOBAL>
Description
This command opens a Telnet session to a remote host. Telnet servers in 7450 ESSnetworks limit a Telnet
clients to three retries to login. The Telnet server disconnects the Telnet client session after three retries. The
number of retry attempts for a Telnet client session is not user-configurable.
Parameters
ip-address — The IP address or the DNS name (providing DNS name resolution is configured) can be
specified.
Values
dns-name — Specify the DNS name (if DNS name resolution is configured).
Values
port — The TCP port number to use to Telnet to the remote host, expressed as a decimal integer.
Default
Values
7450 ESS OS Basic System Configuration Guide
1
1 — 100
router-name: Base, management
service-id: 1 — 2147483647
Base
ipv4-address a.b.c.d
128 characters maximum
23
1 — 65535
Root Commands
Page 101