Alcatel-Lucent 7450 ESS-12 Configuration Manual page 442

interval
Syntax interval interval
no interval
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description
This command specifies the polling interval of the ring-node connectivity verification of this ring node.
Default 5
Parameters interval — Specifies the polling interval, in minutes.
Values
service-id
Syntax service-id service-id
no service-id
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
Description This command specifies the service ID of the SAP used for the ring-node connectivity verification of this
ring node.
Default
no service-id
Parameters service-id — Specifies the service ID of the SAP.
Values
src-ip
Syntax src-ip ip-address
no src-ip
Context config>redundancy>mc>peer>mcr>ring>ring-node>connectivity-verify
This command specifies the source IP address used in the ring-node connectivity verification of this ring
node.
Default
no src-ip
Parameters
ip-address — Specifies the address of the multi-chassis peer.
7450 ESS OS Basic System Configuration Guide
1 — 6000
1 — 2147483647
System Management
Page 413