Saving A Configuration To A Different Filename; Rebooting - Alcatel-Lucent 7210 SAS-D Configuration Manual

Saving a Configuration to a Different Filename

Save the current configuration with a unique filename to have additional backup copies and to edit
parameters with a text editor. You can save your current configuration to an ASCII file.
Use either of the following CLI syntax to save a configuration to a different location:
CLI Syntax: bof# save [cflash-id]
Example
or
CLI Syntax: admin# save [file-url] [detail] [index]
Example

Rebooting

When an admin>reboot command is issued, the system reboots. Changes are lost unless the
configuration is saved. Use the admin>save file-url command to save the current configuration.
The user is prompted to confirm the reboot operation.If the now option is not specified, the user is
prompted to confirm the reboot operation.Use the following CLI syntax to reboot:
CLI Syntax: admin# reboot [auto-init][now]
Example
Resetting...OK
Alcatel-Lucent 7210 Boot ROM. Copyright 2000-2009 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Running POST tests from ROM
Testing ROM load area...done
Relocating code...Jumping to RAM
...
7210 SAS D, E, K OS Basic System Configuration Guide
:
A:ALA-1# bof
A:ALA-1>bof# save cf1:
A:ALA-1>bof#
:
A:ALA-1>admin# save cf1:\testABC.cfg
Saving config.# Saved to cf1:\testABC.cfg
... complete
A:ALA-1#
:
A:ALA-1>admin# reboot
A:DutA>admin# reboot
Are you sure you want to reboot (y/n)? y
Boot Option Files
Page 151