Section 3: Setup; Unpacking; Needed For Setup - Grizzly T28048 Owner's Manual

This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
-12-

SECTION 3: SETUP

machine presents
injury hazards

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
• Screwdriver Phillips #2 ............................... 1
• Open-End Wrench 10mm ........................... 1
• Open-End Wrench 14mm ........................... 1
• Drill Press or Hand Drill w/Guide ................ 1
• Drill Bits (Variable) ................................1 Ea.
• Straightedge 24" ......................................... 1
• Level ........................................................... 1
• Center Punch ............................................. 1
• Erasable Marker ......................................... 1
• Dust-Collection System .............................. 1
⁄ " OD ................................ 1–2
• Dust Hose 2 1
2
• Hose Clamps 2 ⁄ " .................................. 1 –2
1
2
Model T28048 (Mfd. Since 06/17)
Qty