Grizzly T28048 Owner's Manual page 21

19. Lay mounting plate with plate insert inside
table opening on set screws. Make sure
mounting plate faces upward. (Top surface of
mounting has countersinks.)
20. Attach mounting plate to table with (4) M6-1
x 35 flat head cap screws, as shown in
Figure 19.
Mounting
Plate
Figure 19. Securing mounting plate to table.
21. Lay fence assembly on table and insert (2)
M8-1.25 x 92 knob bolts with spacers through
fence and slots in table (see Figure 20).
Knob
Bolt
Spacer
Figure 20. Knob bolts and spacers inserted
through fence and table.
Model T28048 (Mfd. Since 06/17)
x 4
Fence Assembly
Table
Slot
22. Attach fence assembly with (2) M8-1.25
extra-wide hex nuts.
Note: Extra-wide hex nuts fit into channeled
slot on bottom side of table (see Figure 21).
Channeled
Slot
Table
Slot
Figure 21. Inserting extra-wide hex nut into
channeled slot.
23. Slide (2) M6-1 square nuts into T-slot on
fence assembly and attach router bit guard
to fence assembly with (2) M6-1 x 15 knurled
thumb screws, as shown in Figure 22.
Fence Square
Assembly Nut
Fence
T-Slot
Figure 22. Attaching router bit guard to fence
assembly.
x 2
Thumb
Screw
Router
Bit
Guard
-19-