Adjusting Router Bit Guard; Locking/Unlocking Table Inserts - Grizzly T28048 Owner's Manual

Adjusting
Router Bit Guard
A clear router bit guard is included with the Model
T28048 to provide additional safety during router
operations. It is held to the fence assembly with
(2) knurled thumb screws and square nuts. It
adjusts up-and-down and side-to-side to accom-
modate various router operations. The router bit
guard should be positioned vertically about
above the workpiece, and horizontally it should be
centered on the gap between fence boards.
Figure 39. Adjusting the router guard.
-30-
⁄ "
1
8
Knob
Bolts
Locking/Unlocking
Table Inserts
Three table inserts ( ⁄ ", 1
1
2
the Model T28048. They fit into the mounting plate
and provide additional safety and control near the
router bit during router operations. The inserts
are locked in place with an insert wrench, which
is also included with the Model T28048. The
insert wrench works like a spanner wrench. Use
the insert wrench to turn the inserts clockwise to
lock them in place and counterclockwise to unlock
them.
Insert
Wrench
Figure 40. Locking a plate insert.
Model T28048 (Mfd. Since 06/17)
⁄ ", 2") are included with
3
8
Plate
Insert