Grizzly T26413 Instructions Manual

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
This arbor press is designed to perform small
press jobs, such as staking, riveting, and install-
ing/removing bearings. The ram accepts dies,
inserts, and other tooling for custom work.
Figure 1. Model T26414 arbor press.
Material under pressure
could fly apart and cause
impact
wear safety glasses when
using this press.
Keep hands and fingers
away from the ram when
applying downward pres-
sure to avoid pinching inju-
ries.
COPYRIGHT © NOVEMBER, 2013 BY GRIZZLY INDUSTRIAL, INC., REVISED MAY, 2015 (MN)
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Model T26414
Shown
injuries. Always
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
#TS16037 PRINTED IN CHINA
MODEL T26413,
T26414, & T26415
ARBOR PRESS
INSTRUCTIONS
Specifications
T26413
Press Capacity ........................................... 1 Ton
Throat Depth..................................................... 4"
Maximum Workpiece Height .........................6
Ram Size ................................................... 1" x 1"
Ram Bore .....................
Base Size ....................................... 6" W 10
Overall Size ..................... 7
Weight .......................................................32 lbs.
T26414
Press Capacity ......................................... 2 Tons
Throat Depth..................................................... 6"
Maximum Workpiece Height ............................ 8"
Ram Size ............................................ 1
Ram Bore .....................
Base Size ........................................8" W x 16" D
Overall Size ............... 11
Weight .......................................................68 lbs.
T26415
Press Capacity ......................................... 3 Tons
Throat Depth..................................................6
Maximum Workpiece Height ....................... 12
Ram Size ............................................1
Ram Bore .....................
Base Size ........................................8" W x 18" D
Overall Size ............... 11
Weight .....................................................108 lbs.
This arbor press is designed to only be
used for small parts. Do not use this arbor
press for operations beyond its capacity or
modify it for increased leverage.
⁄ " Diameter x ⁄ " Deep
1 1
2 2
⁄
1
2
⁄ " W x 11" D x 13" H
1
4
⁄ " x 1
1
4
⁄ " Diameter x ⁄ " Deep
1 1
2 2
⁄ " W x 16 ⁄ " D x 18" H
1 1
2 2
⁄ " x 1
1
2
⁄ " Diameter x ⁄ " Deep
1 1
2 2
⁄ " W x 18" D x 21 ⁄
1 1
2 2
V2.05.15
⁄ "
1
8
" D
⁄ "
1
4
⁄ "
1
4
⁄ "
3
4
⁄ "
1
2
" H